Changelog 5.1.2 (2017-03-17):

Firmware for D*AP8 FLX, TAP EDITION and CODEC EDITION

Changes 5.1.2:

• fixed (Backup/Restore) coprocessor, watermarking and measurement were missing in preset restore filter list

Changes 5.1.0:

• new feature (Dante) Dante firmware version updated - device is now prepared for AES67 mode operation
• new feature (Audio) Spectral Signature can now be set to manual freeze to stop it from reacting on unwanted audio signals or make use of it as a static equalizer
• new feature (XAP) automatically reconnects after network drop out or power down (XAP firmware update required!)
• new feature (XAP) automatic IP-conflict detection and warning (XAP firmware update required!)
• new feature (Web UI) Dante locked status and AES67 mode shown on Dante interface status page
• new feature (DOLBY) Cat1100 firmware 3.0.0.0 supported
• improved (Web UI) routing matrix scaling permanently enabled
• improved (Web UI) X*AP enable checkboxes greyed out for Remote Hotkeys greater than eight
• fixed (JDSPA) system is no longer trying to fetch parameters from JDSPA if only the bootloader and no firmware is present
• fixed (Web UI) integrated output loudness was not shown in measurement
• fixed (Web UI) time and date are no longer restored from backup file
• fixed (Web UI) issue when setting crosspoints in Google Chrome

Changes 5.0.3 r3:

• added factory default presets file to firmware package please see enclosed ‘how to’ guide for restore instructions

Changes 5.0.3 r2:

• added new manual to zip file

Changes 5.0.3:

• new feature (Audio) added Fail Return time to Surround Detector in Upmix

• new feature (Audio) Fail Over Wait and Return times increased to a maximum of 120 seconds

• improved (Firmware) stability after firmware update process
• fixed (Audio) problem with surround detection in Upmix
• fixed (Audio) problem with failover feeding the Upmix
• fixed (Web UI) minor glitches when minimizing On Air windows
• fixed (System) gateway setting is no longer reset on restore factory defaults if IP reset is deselected

Changes: 5.0.2:

• fixed (Web UI) problem when switching between Spectral Signature tab and other browser tabs

Changes 5.0.1:

• new feature (Audio) FM Conditioner with four independent stereo programs is now available for D*AP8 (JDSPA-Coprocessor hardware option board and license required)
• new feature (Watermarking) GfK Watermarking encoder is now available (JDSPA-Coprocessor hardware option board and license required)
• new feature (Audio) Level Magic is now equipped with a response boost function that temporarily increases its reaction to incoming high level signals - please refer to the manual for details
• new feature (Audio) Level Magics initial response to already normalized audio material was significantly improved
• new feature (Audio) Level Magic is now equipped with an automatic Clear Processing History function that resets the system on long periods of disrupted audio. Please note, Below Threshold Mode needs to be set to Release
• new feature (Mobile UI) configurable button matrix (please see Mobile UI side menu)

• new feature (System) the real time clock can now be synchronized to NTP time servers

• improved (Web UI) added comment to latency compensation setup
• fixed (System) occasionally empty system log
• fixed (Measurement) peak hold problem in aux and monitor meter
• fixed (Web UI) changed routing matrix naming from Sub to LFE
• fixed (Web UI) minor handling issues in remote hotkey list
• fixed (Web UI) display issue in bypass events in case of short program names
• fixed (Web UI) text in quotation marks are no longer deleted at Trigger Equations page
• fixed (Backend) unnecessary device reboot in rare cases when loading web UI in several browsers at the same time

Changelog 2.8.1 (2016-08-17):

Firmware for D*AP8 MAP EDITION Monitoring Audio Processor

Changes 2.8.1:

• new feature (Dolby) Dolby firmware version 2.1.0.4 for CAT1100 officially supported and included in system firmware file

Changes 2.8.0:

• new feature (Mobile UI) configurable button matrix (please see Mobile UI side menu)
• new feature (Mobile UI) functions can now be locked or hidden from Mobile UI via Remote Access control page
• new feature (Web UI) important status messages are now shown on a red info bar
• new feature (Web UI) preset cleanup function helps deleting unused presets
• new feature (XAP) remote access via XAP RM1 is now prepared to be restricted to certain function sets
• new feature (Dolby) Dolby firmware version 2.1.0.2 for CAT1100 officially supported
• new feature (Measurement) added downmix output to metering sources
• improved (XAP) disconnecting XAP from M*AP now requires prompt confirmation
• improved (XAP) mute is now shown more clearly in the XAP display
• improved (X*AP) removed knob acceleration from main volume
• improved (Web UI) Firefox on Windows 10 is now supported
• improved (Web UI) option board detection error message clarified
• improved (Mobile UI) level meter readability
• improved (Mobile UI) metering precision
• improved (Dolby) Metadata default settings
• improved (Dolby) output mute on non-audio flag now consistent
• improved (Presets) added new default presets
• improved (Measurement) 7.1 backsurround channels loudness weighting now according to ITU 1770-4
• improved (Audio) manual stereo routing is now carried out simultaneously for both channels
• improved (System) status and front panel display turns red on DSP halt
• improved (Sync) AES audio input channel 1/2 is now added as a default to the sync priority list
• improved (Firmware) firmware files are internally checked for compatibility before update
• improved (Backup) added serial number to exported backup file name
• improved (Licensing) Dolby E encoder license is now shown more clearly in license list
• fixed (Backup) unnecessary reboot after restoring backup file
• fixed (Web UI) Microsoft Edge is not supported yet and now showing an unsupported browser message
• fixed (Dante and MADI) rarely occurring problem with detection of option boards DT-100 and MX-164 on startup
• fixed (MADI) unwanted cpu load with unconnected MADI inputs
• fixed (Web UI) problem when modifying Log Port and Matrix routings in preset section
• fixed (Web UI) enabling bass management now highlights LFE Gain in circuit diagram
• fixed (Web UI) problem with sticky tool tips
• fixed (Web UI) checkbox width in I/O Events
• fixed (Web UI) problem with occasional appearing script problem in some browsers
• fixed (Web UI) rarely occurring Web UI inaccessibility due to system overload
• fixed (Web UI) problem when importing single presets in Chrome and Firefox Browsers
• fixed (Web UI) Local SDI and MADI Routing now works properly
• fixed (Web UI) problem when modifying routings in preset section
• fixed (Mobile UI) deleting Hotkeys no longer stops Mobile UI from loading
• fixed (Measurement) all meters now have the same release timing
• fixed (Measurement) unintended opening of speech gate in Dialnorm measurement without input signal present
• fixed (Dolby) removed unnecessary error message from systems without Dolby E encoder
• fixed (Dolby) wrong latency in Decoder/Emulation mode after initial boot
• fixed (Presets) problem when deleting presets while being loaded
• fixed (Presets) empty preset groups are no longer automatically restored to factory settings on reboot

Changelog 4.5.2 (2017-12-19):

Firmware for D*AP4 FLX and LM Edition

Changes 4.5.2:

D*AP4 general:

• fixed (Web UI) creating events works as expected now in Internet Explorer
• fixed (Web UI) problem with timed out web interface on heavy EQ user interaction

Easy Loudness only:

• fixed (Web UI) small graphical slip in Home overview
• fixed (Web UI) targetless links in system and interface overview

Changes 4.5.0:

D*AP4 general:

• fixed (Web UI) problem with disappearing checkboxes in some versions of Firefox
• With version 4.5 we are proud to introduce our newest member of the D*AP4 family: Easy Loudness

Easy Loudness only:

• new feature (Web UI) HOME page for easy access to all main parameters (Easy Loudness only)
• new feature (Web UI) pop-up when entering interfaces page (Easy Loudness only)
• new feature (Web UI) snapshot functionality for fast and easy preset recall - replaces EVENT system (Easy Loudness only)

Changelog 2.0.6 (2017-12-20):

Firmware for D*AP4 VAP EDITION Voice Audio Processor

Changes 2.0.6r2:

• added known issue to version history

Changes 2.0.6:

• fixed (Audio) problem with muted output in voice compressor
• fixed (Web UI) problem with timed out web interface on heavy EQ user interaction

Changes 2.0.4:

• fixed (Web UI) creating events works as expected now in Internet Explorer
• fixed (Web UI) problem with timed out web interface on heavy EQ user interaction
• fixed (Web UI) problem with disappearing checkboxes in some versions of Firefox

Changelog 1.10.1 (2017-03-06):

Firmware-Package for X*AP RM1

Changes1.10.1:

• fixed (Menu) Restore Factory Defaults works as expected

Changes 1.10.0:

• new feature (Network) automatically reconnects after network drop out or power down
• new feature (Network) automatic IP-conflict detection and warning
• improved (Network) stability and robustness against network problems
• improved (Network) connectivity when using new device with previously utilized ip address

Changelog 3.6.1 (2017-03-14):

Firmware-Package for T*AP Television Audio Processor (Legacy Hardware)

Changes 3.6.1:

• changed (Web UI) java meter applet replaced by web sockets to revive metering in browsers without java support

Please note: the java browser plugin is no longer necessary with T*AP

• improved (Web UI) unsupported browser message is up to date again
• improved (Web UI) Chrome, Firefox, Edge and Internet Explorer supported
• improved (XAP) updated all Audio Processor parameters on XAP RM1
• X*AP firmware update necessary (1.10.1)!

Changelog 2.1.1 (2017-03-14):

Firmware-Package for D*AP LM4 [LEGACY PRODUCT (EOL) ! ]

Changes 2.1.1:

• changed (Web UI) java meter applet replaced by web sockets to revive metering in browsers without java support

Please note: the java browser plugin is no longer necessary with LM4

• improved (Web UI) unsupported browser message is up to date again
• improved (Web UI) Chrome, Firefox, Edge and Internet Explorer supported